Identification

Field	Value
Title	Shellharbour seabed landforms derived from multibeam echosounder data 2022
Abstract	Mulitbeam echosounder (MBES) bathymetry data were collected offshore of Shellharbour, NSW in 2017. Bathymetry data coverage extends from Port Kembla to Bass Point, and ranges from 10 to 64 m water depth. This dataset represents a classification of seabed landforms derived from this MBES, which delineates the prominent seabed features observed. This classification defines areas of reefs, peaks, plains, scarps, depressions and channels. Features were classified using the Seabed Landforms Classification Toolset developed for ArcGIS by the Coastal and Marine Unit, DPE (Linklater et al. 2023) which are publicly available on SEED (https://datasets.seed.nsw.gov.au/dataset/seabed-landforms-classification-toolset) and GitHub (https://github.com/LinklaterM/Seabed-Landforms-Classification-Toolset/). A preliminary classification of this Shellharbour survey was presented in Kinsela et al. (2020), and this classification represents the final interpreted product for this survey. This dataset contributes toward an understanding of the distribution of submerged reefs along the NSW coast, which provides fundamental baseline information for managers, users and custodians of the marine environment. The source MBES dataset for this classification is available on the Australian Ocean Data Network portal: https://portal.aodn.org.au/ Linklater, M., Morris, B.D. and Hanslow, D.J. (2023), Classification of seabed landforms on continental and island shelves. Frontiers in Marine Science, 10, https://www.frontiersin.org/articles/10.3389/fmars.2023.1258556/full. Kinsela, M.A., Hanslow, D.J., Carvalho, R.C., Linklater, M., Ingleton, T.C., Morris, B.D., Allen, K.M., Sutherland, M.D. Woodroffe, C.D., 2022. Mapping the shoreface of coastal sediment compartments to improve shoreline change forecasts in New South Wales, Australia. Estuaries and Coasts, pp.1-27.
Resource locator
Show on SEED Web Map	Name: Show on SEED Web Map Protocol: WWW:DOWNLOAD-1.0-http--download Description: Display dataset on SEED's map Function: download
Data Quality Statement	Name: Data Quality Statement Protocol: WWW:DOWNLOAD-1.0-http--download Description: Data quality statement for NSW seabed landforms derived from marine lidar data 2021 Function: download
Download Package	Name: Download Package Protocol: WWW:DOWNLOAD-1.0-http--download Description: Data (Shapefile) Function: download
REST Service	Name: REST Service Protocol: WWW:DOWNLOAD-1.0-http--download Description: Shellharbour seabed landforms derived from multibeam echosounder data 2022 - REST Function: download
Unique resource identifier
Code	b32b4201-0277-4adf-a98f-10b1d37c0e4f
Presentation form	Map digital
Edition	1
Dataset language	English
Metadata standard
Name	ISO 19115
Edition	2016
Dataset URI	https://datasets.seed.nsw.gov.au/dataset/b32b4201-0277-4adf-a98f-10b1d37c0e4f
Purpose	To support coastal and marine research, planning and management
Status	Completed
Spatial representation
Type	vector
Spatial reference system
Code identifying the spatial reference system	4283
Spatial resolution	5 m

Classification of spatial data and services

Field	Value
Topic category

Keywords

Field	Value
Keyword set
keyword value	MARINE-Coasts MARINE MARINE-Reefs PHOTOGRAPHY-AND-IMAGERY-Remote-Sensing GEOSCIENCES-Geomorphology WATER ECOLOGY-Habitat ECOLOGY-Landscape
Originating controlled vocabulary
Title	ANZLIC Search Words
Reference date	2008-05-16
Geographic location
West bounding longitude	150.87
East bounding longitude	151
North bounding latitude	-34.6
South bounding latitude	-34.5
NSW Place Name	Shellharbour
Vertical extent information
Minimum value	-100
Maximum value	2228
Coordinate reference system
Authority code	urn:ogc:def:cs:EPSG::
Code identifying the coordinate reference system	5711
Temporal extent
Begin position	2017-05-01
End position	N/A
Dataset reference date
Resource maintenance
Maintenance and update frequency	Not planned
Contact info
Contact position	Data Broker
Organisation name	NSW Department of Climate Change, Energy, the Environment and Water
Telephone number	131555
Email address	data.broker@environment.nsw.gov.au
Web address	https://www.nsw.gov.au/departments-and-agencies/dcceew
Responsible party role	pointOfContact

Quality and validity

Field	Value
Lineage	Multibeam echosounder data was collected offshore of Shellharbour, NSW in 2017, covering an area of 45 km2 in 10 to 64 m water depth. This dataset represents a classification of seabed landforms derived from this MBES data, which delineates the prominent seabed features observed. This classification defines areas of reefs, peaks (uppermost part of the reef surface), plains, depressions and channels (within the reef surface), and scarps (areas greater than 10 degrees slope). The dataset is provided as an ArcGIS shapefile. Features were classified using the Seabed Landforms Classification Toolset (ArcGIS), developed by DPE (Linklater & Morris, 2022) which applies the methodological framework presented in Linklater et al. (2019). In this classification approach, ruggedness (VRM, Walbridge et al. 2018), slope, finescale and broadscale Bathymetric Position Index (Slope Position, Evans et al. 2014) variables were derived from the MBES dataset and used to characterise prominent features within the seascape. Procedures were implemented to reduce potential noise within the dataset and identify the full extent of reef outcrops. Manual editing was performed to separate inferred reef outcrops from soft sediment bedforms, with the resulting classification focussed on identifying the presence, extent and character of submerged reef outcrops within the MBES dataset. The classification output was reviewed and edited by the data creator to capture observed and interpreted seabed features. The resulting layer was externally reviewed to ensure scientific rigour and data integrity. Shellharbour multibeam echosounder data will be made available for download on AODN: https://portal.aodn.org.au Linklater, M. and Morris, B., 2022, Classification of seabed landforms on continental and island shelves. Manuscript in preparation. Kinsela, M.A., Hanslow, D.J., Carvalho, R.C., Linklater, M., Ingleton, T.C., Morris, B.D., Allen, K.M., Sutherland, M.D. Woodroffe, C.D., 2020. Mapping the shoreface of coastal sediment compartments to improve shoreline change forecasts in New South Wales, Australia. Estuaries and Coasts, pp.1-27. Linklater, M., Ingleton, T. C., Kinsela, M. A., Morris, B. D., Allen, K. M., Sutherland, M. D., Hanslow, D. J., 2019. Techniques for classifying seabed morphology and composition on a subtropical-temperate continental shelf. Geosciences, 9(3), 141. Walbridge, S., Slocum, N., Pobuda, M., Wright, D.J., 2018., Unified geomorphological analysis workflows with Benthic Terrain Modeler. Geosciences, 8(3), 94. Evans, J., Oakleaf, J., Cushman, S., 2014., An ArcGIS Toolbox for Surface Gradient and Geomorphometric Modeling, Version 2.0-0. Available online: https://github.com/jeffreyevans/GradientMetrics.

Field

Value

Lineage

Multibeam echosounder data was collected offshore of Shellharbour, NSW in 2017, covering an area of 45 km2 in 10 to 64 m water depth. This dataset represents a classification of seabed landforms derived from this MBES data, which delineates the prominent seabed features observed. This classification defines areas of reefs, peaks (uppermost part of the reef surface), plains, depressions and channels (within the reef surface), and scarps (areas greater than 10 degrees slope). The dataset is provided as an ArcGIS shapefile. Features were classified using the Seabed Landforms Classification Toolset (ArcGIS), developed by DPE (Linklater & Morris, 2022) which applies the methodological framework presented in Linklater et al. (2019). In this classification approach, ruggedness (VRM, Walbridge et al. 2018), slope, finescale and broadscale Bathymetric Position Index (Slope Position, Evans et al. 2014) variables were derived from the MBES dataset and used to characterise prominent features within the seascape. Procedures were implemented to reduce potential noise within the dataset and identify the full extent of reef outcrops. Manual editing was performed to separate inferred reef outcrops from soft sediment bedforms, with the resulting classification focussed on identifying the presence, extent and character of submerged reef outcrops within the MBES dataset. The classification output was reviewed and edited by the data creator to capture observed and interpreted seabed features. The resulting layer was externally reviewed to ensure scientific rigour and data integrity.

Shellharbour multibeam echosounder data will be made available for download on AODN: https://portal.aodn.org.au

Linklater, M. and Morris, B., 2022, Classification of seabed landforms on continental and island shelves. Manuscript in preparation.

Kinsela, M.A., Hanslow, D.J., Carvalho, R.C., Linklater, M., Ingleton, T.C., Morris, B.D., Allen, K.M., Sutherland, M.D. Woodroffe, C.D., 2020. Mapping the shoreface of coastal sediment compartments to improve shoreline change forecasts in New South Wales, Australia. Estuaries and Coasts, pp.1-27.

Linklater, M., Ingleton, T. C., Kinsela, M. A., Morris, B. D., Allen, K. M., Sutherland, M. D., Hanslow, D. J., 2019. Techniques for classifying seabed morphology and composition on a subtropical-temperate continental shelf. Geosciences, 9(3), 141.

Walbridge, S., Slocum, N., Pobuda, M., Wright, D.J., 2018., Unified geomorphological analysis workflows with Benthic Terrain Modeler. Geosciences, 8(3), 94.

Evans, J., Oakleaf, J., Cushman, S., 2014., An ArcGIS Toolbox for Surface Gradient and Geomorphometric Modeling, Version 2.0-0. Available online: https://github.com/jeffreyevans/GradientMetrics.

Constraints related to access and use

Field	Value
Limitations on public access

Data Quality

Field	Value
Scope	dataset
DQ Topological Consistency
Explanation	ArcInfo was used to do a topological consistency check to detect flaws in the spatial data structure. No polygon overlaps were detected.
DQ Absolute External Positional Accuracy
Explanation	This dataset represents seabed features classified from 5 m cell size input bathymetry data, with no ground-truthing undertaken. Polygons smaller than 100 m2 were eliminated. Due to the variability in sediment movement, precise feature boundaries can be variable over time.

Responsible organisations

Field	Value
Responsible party
Contact position	Data Broker
Organisation name	NSW Department of Climate Change, Energy, the Environment and Water
Telephone number	131555
Email address	data.broker@environment.nsw.gov.au
Web address	https://www.nsw.gov.au/departments-and-agencies/dcceew
Responsible party role	pointOfContact

Metadata on metadata

Field	Value
Metadata point of contact
Contact position	Data Broker
Organisation name	NSW Department of Climate Change, Energy, the Environment and Water
Telephone number	131555
Email address	data.broker@environment.nsw.gov.au
Web address	https://www.nsw.gov.au/departments-and-agencies/dcceew
Responsible party role	pointOfContact
Metadata date	2024-02-26T13:30:28.886096
Metadata language

Identification

Title

Abstract

Resource locator

Show on SEED Web Map

Data Quality Statement

Download Package

REST Service

Unique resource identifier

Code

Presentation form

Edition

Dataset language

Metadata standard

Name

Edition

Dataset URI

Purpose

Status

Spatial representation

Type

Spatial reference system

Code identifying the spatial reference system

Spatial resolution

Classification of spatial data and services

Topic category

Keywords

Keyword set

keyword value

Originating controlled vocabulary

Title

Reference date

Geographic location

West bounding longitude

East bounding longitude

North bounding latitude

South bounding latitude

NSW Place Name

Vertical extent information

Minimum value

Maximum value

Coordinate reference system

Authority code

Code identifying the coordinate reference system

Temporal extent

Begin position

End position

Dataset reference date

Resource maintenance

Maintenance and update frequency

Contact info

Contact position

Organisation name

Telephone number

Email address

Web address

https://www.nsw.gov.au/departments-and-agencies/dcceew

Responsible party role

Quality and validity

Lineage

Constraints related to access and use

Limitations on public access

Data Quality

Scope

DQ Topological Consistency

Explanation

DQ Absolute External Positional Accuracy

Explanation

Responsible organisations

Responsible party

Contact position

Organisation name

Telephone number

Email address

Web address

https://www.nsw.gov.au/departments-and-agencies/dcceew

Responsible party role

Metadata on metadata

Metadata point of contact

Contact position